Outils personnels

Detection de scanner Epson

De wikiGite

# sane-find-scanner

Ça donne quelque chose comme ça :

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8, product=0x0838) at libusb:001:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.


Modifiez le fichier /etc/sane.d/epson.conf avec les droits administrateur.

Ajoutez en fin de fichier (ou modifier la ligne "usb" existante) :

usb 0x4b8 0x0838

Le scanner devrait répondre lorsqu'on tape :

scanimage -L

Il ne reste plus qu'à lancer Xsane ou SimpleScan.

Si ça ne fonctionne toujours pas

Ouvrir le fichier /etc/sane.d/dll.conf. Si "epson" est commenté et "epson2" décommenté, alors modifier epson2.conf plutôt que epson.conf.